Aico EI3024

Product Information

The Ei3024 Multi-Sensor Fire Alarm combines both optical smoke and heat sensors to provide a quicker and reliable response to any potential threat of fire in the home. Mains voltage: Aico Ei3024 runs on 230V AC mains power, and in the event of mains failure, there's a 10 year + built in tamper-proof rechargeable lithium battery, which provides back-up supply and continuous operation.

Ei3024 Multi-Sensor Fire Alarm with Heat and Optical Smoke Aico Ei3024 Multi-Sensor Fire Alarm with Heat and Optical Smoke

The Ei3024 is fitted with a large central Test/ Silence button to facilitate frequent testing of the alarm and system. The memory feature allows an Alarm that has previously activated to be easily identified (through the red flashing LED). The memory feature allows an alarm that has previously activated to be easily identified (through the red flashing LED). It is a mains powered alarm with 10 year rechargeable Lithium cell back-up, and it is compatible with SmarkLINK interconnection and monitoring technology (when the extra module is purchased an installed). The Ei3024 is a Mains powered Multi-Sensor Fire Alarm that contains two separate sensing elements – optical and heat.The alarm has a unique self-monitoring dust compensation mechanism incorporated into its software, which will allow the alarm to tolerate up to twice as much more dust contamination than a conventional optical alarm. The Ei3024 Multi-Sensor Fire Alarm contains both Optical and Heat sensors to provide total fire coverage.

Ei3024 Mains Interlinked Multi-Sensor Fire Alarm - Screwfix Aico Ei3024 Mains Interlinked Multi-Sensor Fire Alarm - Screwfix

There are two different types of batteries used as battery back-ups in our mains powered smoke and heat alarms. The Ei3024 can operate as a standalone Alarm or can be interconnected either by hard-wire or wirelessly (using the EI3000MRF module) enabling it to communicate with compatible Ei Alarms and accessories. You will know when you need to change the battery, as you will hear a single regular beep (low battery warning) coming from the alarm, however it is recommended that you change the battery every year. Test/Silence facility: it comes fitted with a large Test/Hush button which facilitates frequent testing of the alarm and system. The Aico Ei3018 is a CO alarm (Carbon Monoxide Alarm) containing a proven electrochemical CO sensor .If you have more than one alarm in the property and they are interconnected, this will also trigger all the other alarms in the property. If you are using a Ei1529RC or Ei412 you will need to flick the ‘Test’ switch off to finish the test. Therefore, if the alarm is purchased 5 years after the manufacture (for example), the guarantee is only for 5 years. This smart technology coupled with a 10-year rechargeable lithium cell back-up, will give you a reliable total fire response for peace of mind and to keep your home safe.

Ei3024 Multi-Sensor Fire Alarm | Aico Ei3024 Multi-Sensor Fire Alarm | Aico

Our 140RC range contains a 9V Alkaline battery as it’s back up power supply and this will need changing across the life span of the alarm. Above this is the ‘Replace By’ date, but note that the date on the label shows the maximum life of the alarm and alarms should always be replaced before their life is up.This is the Aico Ei3024 is a multi-sensor fire alarm with enhanced optical smoke sensor and automati. Its ability to respond quickly to both fast flaming and smouldering fires, simplifies alarm choice for the designated rooms/areas.

Ei3024 230v 3000 Series Optical and Heat Multi-Sensor Fire Alarm Aico Ei3024 230v 3000 Series Optical and Heat Multi-Sensor Fire

We would just like to express our absolute gratitude with the support of these upcoming projects we have found ourselves working on. The Ei3024 fitted with the Ei3000MRF module can be connected to the SmartLINK Cloud Portal via the installation of the Ei1000G Gateway enabling live monitoring, details of system installations and notifications of Alarm activations and system events via alert, text message or e-mail. If the unit is in alarm when pressed, it silences the alarm for 10min (if alarming due to heat), 4 minutes (if alarming due to <150ppm CO).

This is the Aico Ei450 RadioLINK / RadioLINK+ / SmartLINK alarm controller for controlling all the a. If it is a regular single beep (approximately once every minute), then the battery may be running low, and you may need to change the battery in the alarm.