Yealink W60B DECT Base Station - Black

Product Information

Outgoing connections from our LAN firewall should just connect and reach the PBX in GCP no problem. The phone provisions successfully over 5001 once we forwarded that port to the SBC. So what am I missing? Surely the outgoing connections and ports like 5090 should just work. The Yealink W60P Wireless DECT IP Phone is a premium phone designed with robust hardware, ideal for businesses that require greater capability to handle a heavy call load. NOTE: If you are using Power over Ethernet (PoE), you don't need to connect the AC adapter. Make sure the Ethernet cable and router or switch is Power over Ethernet (PoE) compliant. ¶ Power over Ethernet (PoE) i discovered this by using cd /var and cd log and then ls to show the directory contents and then one more cd /3cxsbc Features -> General Information -> Fwd International --> set to Disable (no need to allow forwarding to international numbers)

I had registered the MAC, IP, etc., all via the Cloud Voice cPanel, but it refused to work. I literally wasted days on this, and eventually gave up and called BT support. Does anyone have any ideas where to go next with this as I am lost what we are trying to do with the SBC in terms of incoming ports and what to forward to where?You then make sure you remove any port forwards from your office firewall that have anything to do with the SBC and the phones -> This is another variable eliminated Connect the ethernet cable between the Internet port on the phone and the network port on a router or switch to access LAN. This Configuration Guide is written as general guide on how to configure the Yealink phone model W60B to work with PBXware 4.1. ¶ Video Tutorial So until we forwarded the incoming port 5001 on our LAN to the SBC, the W60B phone could not auto-provision and that seems perfectly logical given the above. What am I missing here? Can you please confirm the Ingress ports necessary to be open on GCP to allow the IP range 0.0.0.0/0 to use. Should there be a port entry for the port TCP 5001? I don't believe so.

You can enable/disable DND via the handset for each of the SIP accounts allocated to the Yealink handset: I must say, not being able to access the cPanel is a bit annoying, as you lose access to certain features – i.e. directory, codec settings, etc.

Cookies on BT Business Direct

Clip the Base Stand onto the Base Station to allow it to stand up, or use screws drilled 59mm apart to mount onto a wall. Connect the Ethernet cable between the Internet port on the phone and an available port on the in-line power router or switch. This chapter describes how to install and connect the phone to the electrical power and data network as well as how to apply factory settings.

Now these are the errors (using Level = ERR) i can see in the log file,but I don't know what to do about them, perhaps you can help? (see attachment)Video tutorial explaining Auto Provisioning setup for Yealink Phone on PBXware 5. ¶ Requirements ¶ Identifying phone model Device Management Platform – Yealink’s device management platform (YDMP) has been designed specifically to assist installers with their deployment by speeding up provisioning times significantly. The Yealink YDMP is deployed on premise as a lightweight application and allows installers to easily detect and provision multiple phones through an easy to use interface. Additionally, YDMP provides a graphical overview of your devices, can report various factors impacting audio quality and even trigger alarms based on the parameters you define. Speed up your deployment time and stay aware of what’s happening in real time with Yealink’s device management platform. BT appears to have restricted the reset on the GUI but may not have considered all the scenarios of the connect button reset. The base station is what is provisioned by 3CX and registers via SIP to 3CX. The handset registers or pairs to the base station via DECT. Then you associate a handset with a line which is one of the SIP accounts provisioned on the base station: