Corefix 100mm Heavy Duty Dot & Dab Wall Fixings - Plasterboard Over Blockwork Wall Plugs & Screws - For TVs, Radiators, Shelving & more - Holds 100kg on 4 fixtures - Reinforced Steel Core – Box of 24

Product Information

With a 120mm screw length, the Corefix 120 is ideal for securing deeper fixtures of between 10mm and 30mm thick, such as timber battens, shelves and cabinets. To calculate the overall star rating and percentage breakdown by star, we don’t use a simple average. INDEPENDENTLY TESTED AND CERTIFIED: Made in Britain, our wall fixings have been independently strength tested, verified and certified to ensure a strong, secure and safe finish, making them a top choice for modern homes. They mention that the fixings work well, are a very good solution for this kind of wall, and are perfect for modern homes where plasterboard is dot and dabbed onto the wall. The engineered plasterboard fixing that ‘bridges the gap’ between board and wall, using the masonry as the anchor point to achieve superb load values.

Use the drill to create a hole, hammer in the wall plugs and steel core, and secure the screw with a screwdriver to complete the installation. Please consider that if you are having the goods delivered to a country in the EU, then UK VAT rates apply.Then contact your credit card company, it may take some time before your refund is officially posted. If you need to secure deeper fixtures, then we recommend the Corefix 120 Dot and Dab Wall Fixing, which has a 120mm screw length. So the first 3 layers of my 1950s wall are plaster on insulated plasterboard (PB + 40mm PR bonded at factory). I also like those fixings but mine came with a spanner that stopped the plug spinning in the plasterboard. We send deliveries via our warehouse and also operate a direct from the manufacturer route for certain products.

Thought splashing out on the Corefix screws was the answer but it wasn't meant to be as straightforward as that. United Kingdom (Deutsch, English) (Nederlands, français, English) (Português) (Български) (English, français) (简体中文, English) (čeština, English) (dansk, English) (eesti keel) (suomi, English) (français, English) (Deutsch, English) (magyar, English) (English) (English) (Italiano,English) (한국어) (latviešu) (lietuvių k. We will make every effort to deliver goods on the date or within the dates quoted, however, such dates are a guideline only and wesupplyfixings shall not be held liable in any way due to delayed deliveries that are out of our control.Corefix provides a reliable solution for fixing heavy items to plasterboard supported on battens or dot and dab, or similar substrates. Beyond that, it's wet plaster, but as mentioned by another poster, it could be 3mm or it could be as much as 20mm. At We Supply Fixings we are extremely confident in the standard and quality of the products that we offer. This is achieved by bridging the gap that dot and dab creates, by way of a zinc plated steel tube insert.

Corefix Dot and Dab Wall Fixings secure the load to the hard surface behind the board, either brick or block, bridging the gap between the board and wall. br />
About Metex:
Metex design and manufacture high quality and innovative construction products where improvements can be made on existing and traditional methods. Either the spring ones or those that open out when screwing BUT with the special tool like a rivet gun or it just spins around. Although most Supplier Direct products are available nationally, restrictions and surcharges may apply subject to your postcode. These fixings are ideal to fit timber battens and secure heavy loads, such as cabinets, shelves and brackets on dot and dab walls.Therefore they are ideal for fixing brackets, shelves and heavy items such as TVs, wall units, boilers and radiators to dot and dab walls. NOTE: For deliveries outside the EU, you will have to pay your country’s import duties, taxes and any handling charges. Dot and dab walls comprise of a solid wall with plasterboard stuck on to it using “dabs” of adhesive. im lucky to not have any radiators on aircrete walls, but yeah would definitely need a different approach to the ones mentioned above.

With this tool the fixing pulls tight without spinning and so there is no damage to the plasterboard. Since these providers may collect personal data like your IP address we allow you to block them here.We also use different external services like Google Webfonts, Google Maps, and external Video providers. Corefix prevents this issue by transferring the load directly to the solid masonry by way of the steel insert. Obviously for use on dot and dab walls in a new home and not for stud partitions, but now I’ve found them, I’ve told a lot of people about them! I would say they aren’t long enough, the top layer 40mm+pb +plaster will be near on 55mm, your old plaster will be likely 20mm overall if it’s traditional wet plaster, maybe more depending how many layers is on, and then you need min 40mm in the brick. Whether you’re looking for tools or timber for a one-off job, or a range of building materials for a large project, you’ll find everything you need all in one place, here at Bradfords.