Shackle Hitch Receiver, 2 inch 42000 Lbs Maximum Break Strength, Solid with 3/4'' D Ring, Heavy Duty Towing Hitch Receivers, Never Rust, Best Towing Accessories for Vehicle Recovery Off-Road

Product Information

With this Borne Off-Road 2-inch hitch receiver shackle mount, your class 2 to class 4 hitch can double as a recovery point wherever you go. The terms and conditions of this Warranty Policy are subject to change by Mishimoto at any time without notice. Mishimoto Automotive (“Mishimoto”) warrants its products under this lifetime limited warranty policy (“Warranty Policy”). Even if a shackle hitch isn’t for you, it’s imperative that you realize the differences between proper and improper recovery techniques. This Warranty Policy applies solely to: (i) Mishimoto Products purchased directly from Mishimoto or Mishimoto authorized dealers (each a “Mishimoto Product” and collectively, the “Mishimoto Products”) and (ii) the original purchaser of such Mishimoto Product (“Purchaser”).

Please check your owner’s manual to see if your truck comes equipped with load rated and tested vehicle recovery points. It puts a bending load instead of a shear load (which is what hitch pins are designed for) on the pin and can bend the pin and get it stuck in the receiver.Normal" shackle hitches are, to us, anything that fits in a 2" receiver hitch, uses a 5/8" hitch pin, and uses a 3/4" shackle. It’s doing the same thing as an accessory installed in the receiver - supporting the length of the pin inside the receiver so that it is applying 2 shear forces to the pin instead of 1 bending load along the whole length. If you attempt to tug or snatch a vehicle while using a ball hitch, then you risk having the strap come loose which can potentially damage your vehicle or worse, hurt you or someone with you. The vast majority of vehicle recovery won't require that much capacity, but if you do, consider double pinning the shackle and reinforcing your receiver hitch. Read more about the condition New: A brand-new, unused, unopened and undamaged item in original retail packaging (where packaging is applicable).

D-rings are also a very safe method of recovery because they are made of thick steel and often times are a close loop circuit. With a proper draw bar or accessory installed the pin is supported along its length inside the receiver tube so only 2 shear forces are applied at the interface between the draw bar and receiver tube. R S Parkin, t/a Darkside Developments is a credit broker, not a lender and is authorised and regulated by the Financial Conduct Authority (FRN 728646).Highly recommended ⭐⭐⭐⭐⭐➕ Fast despatch time, packaged with care and attention and was just as described in the picture description. Turbo S PDK WM 2013 Porsche 911 (991) Carrera 4 MT WM 2013 Porsche 911 (991) Carrera 4 PDK WM 2013 Porsche 911 (991) Carrera 4S MT WM 2013 Porsche 911 (991) Carrera 4S PDK 2013 Porsche 911 (991) Carrera MT WM 2013 Porsche 911 (991) Carrera PDK WM 2013 Porsche 911 (991) Carrera S MT WM 2013 Porsche 911 (991) Carrera S PDK WM 2013 Porsche 911 (991) Carrera S X51 MT WM 2013 Porsche 911 (991) Carrera S X51 PDK WM 2013 Porsche 911 (997.