God Hand PN-120 single-edged nippers

Product Information

I’d go further still. this guide focuses on cutters which should be used to cut sports from your sprue. if you are cutting the frame of the sprue itself, I’d suggest some larger and probably cheaper cutters. When trying to slice-cut a 3 mm dia. runner, the blade moves in smoothly and finishes cutting without sound.

Usually, when I cut pieces out of the sprue, I leave a small nub that I can then cut off with an X-Acto knife. But the God Hand is so sharp and narrow that it can get right up against the part, allowing me to skip the knife step. With the God Hand, my process is this: FauxHammer.com is dedicated to finding the best tools for your hobby. Start with our list of Essential Hobby Tools which will lead you to find the Top-10 tools for each category. This set made by C.K tools is made for electronics wire cutting. C.K is a 100-year-old brand which makes incredible products. Precision engineering at it’s finest.The standard force for cutting 3 mm dia. plastic is 2 kg or less. (General nippers are 3.5 kg to 10 kg)

You may Know Redgrass Games as the creators of the Everlasting Wet Palette – here’s another of their offerings – the RGG Precision Nippers. Poor lubrication of moving parts causes wears on the shaft and rattling, leading to reduced sharpness. Please lubricate the moving parts regularly.

Reset your password

A good nipper will be your dependable ally in even the roughest of builds and cuts. The best way to protect it and make it last is with proper maintenance and usage. In this blog, we’ll be talking about the basics of how to use and care for your GODHAND Nippers to ensure that the time you spend with them is long and worthwhile. Summary When selecting Knippers, the best ones have a thin low-profile cutting nose. which will allow you to get right into the part when you cut it off. However, for those which go to a point, the point itself is so fine that after some use can break off and snap. Sebum may cause rust. If you touch the metal parts directly, wipe off any fingerprints and dirt, and apply rust-preventive oil. God-hand a cut above the rest (no I won’t apologise for that). if you just wanted to know which are the best cutters, these are them.