Joined in 2023 
82 
63 About this deal
The Anycubic Mono SQ is only connectible via USB, meaning those of you who prefer to use Wi-Fi or cable connections will be disappointed. Failure to return the product to Anycubic within 7 business days after the replacement has been confirmed by Anycubic. The serial number of the defective product and/or visible evidence describing the defect may be required. The Photon Mono X2 is a 4K printer with Anycubic’s smooth “LighTurbo” system. Because the X2 is a bigger printer, its light source is stretched across a bit more area, resulting in a slightly lesser resolution of 48 microns. This is still incredibly crisp, especially when you consider that a human hair averages 70 microns.
Like all 3D printers, the Anycubic Photon Mono X2 requires calibration before its first print. Leveling the build plate is fairly straightforward and only takes a piece of paper and an Allen wrench. Unfortunately, there’s no good way to tell if you’ve succeeded in leveling until you start printing. The Mono 4K has a larger build volume of 165 x 132 x 80mm, so it’s perfect if you want to print miniatures like statuettes and Warhammer model figurines. It also means you’ll be perfectly comfortable building pieces for larger, multi-part builds. Print Speed The Mono X wins outright with the biggest build volume of them all. At an impressive 192 x 120 x 245mm, there is pretty much no print so big you won’t be able to manage it. Note: The warranty period for the LCD Screen of some machines has been extended from 3 months to 6 months. Effective models: Mono 2, Mono X 6Ks, Mono M5s, Mono M5 and LCD printers listed by Anycubic later. Technology The screen is also equipped with a protective shield to defend against resin spillages and leaks, which is very good news to those of us who’ve had to deal with such messes in the past. Connection
Join Our Newsletter
At around 50mm/hour, the Mono 4K’s print speed is about average for a printer like this, but can’t be described as slow. Given its impressive build volume, you may be waiting a while for the bigger prints, but that shouldn’t be a deal-breaker given its low cost and impressive capabilities. Touchscreen Inability to provide evidence of damage during transportation or images/videos showing the machine's malfunction. The upgraded version of the self-developed Anycubic Photon Workshop 3.0 slicer offers you a wide range of versatile possibilities: Punching, propping, peeling and arranging layouts. Professional, free and with a simplified user interface!
Essentially, this means that if build volume is your main focus, then the Anycubic Mono is definitely the one for you. While it falls short in other areas by comparison, the dollars to build size can’t be beaten. Print Speed The Photon Mono X 6Ks is equipped with the optimised Anycubic LightTurbo matrix light source and with a high-precision optical lens. The combination of these two components creates a stable and uniform light source with parallel light beams. This eliminates optical layers and grid lines, leaving smooth and fine model surfaces.
The UV power of a 3D printer is the intensity of the ultraviolet (UV) light source used to cure the resin during the printing process, and it is a measure of the energy delivered per unit area of resin. UV power is measured in watts per square centimeter (W/cm²) and determines the rate at which the resin cures. Higher UV power cures the resin faster and correspondingly faster print speeds. Different UV power levels will have an impact on the quality and efficiency of the print. Adjusting the UV power according to the needs is one of the practical printing skills.
It comes with a screen protector for the LED glass, which covers the glass to protect it from scratches or dreaded resin drips. Despite its greater build capabilities, the Mono X falls into the middling ground when it comes to print speed. At a maximum of 60mm/h, it is noticeably faster than the original Mono printer. Touchscreen To level the machine, remove the vat and then place the piece of paper provided by Anycubic on the LCD screen. Loosen the four adjustment screws on the sides of the build plate. The build plate should wiggle freely.The Anycubic Photon Mono X 6Ks is a resin printer in a class of its own! In addition to a 9.1 inch 6K display and a large build volume of 195.84 x 122.4 x 200 mm, the printer impresses with its advanced and precise operation. If a tighter budget is your deciding factor, however, then the original Anycubic Mono is a perfectly serviceable machine with no real downsides in terms of print quality or usability. While slower than the others, it’s still one of the better and cheaper resin printers available on the market today.
While it boasts a standard touchscreen, the LCD screen of the Anycubic Mono 4K is at 6.23’’. This makes perfecting your settings and designs much simpler and more satisfying to carry out, and looks pretty cool to boot. This is excellent news for those of you who want to make larger prints like busts or statuettes, and given how MSLA resin printers print entire layers at once unlike FDM printers, you’ll be able to fit more of your minis in each print job. Print Speed The Mono 4K is an impressive addition to Anycubic’s line of resin printers, and has a host of features geared toward those of you who want to print big impressive projects without spending too much. Build Volume
Press Reviews
With a print volume of 4.76 litres and a build space of 195.84 x 122.4 x 200 mm, you can afford to print larger models as well as perform multiple prints in one pass. Increased efficiency is guaranteed!
Related:
Great Deal 
New Comment