Everbuild High Temperature Heat Resistant Paint, Black, 125 ml

Product Information

Fill surface defects with an appropriate filler. Depending on the paint you’re using you may need to spot prime any filled areas. Refer to the manufacturer’s instructions. Fireproof paint products include intumescent paint for steel, water based fire retardants, kits to upgrade wooden doors and much more. Zeroflame Fire Retardant Treatment achieves Class 0 Fire protectionand Spread of Flame on solid timber and can be used on interior or exterior timber. Thermoguard Thermoproof Fluid works in a comparable way, working to protect porous wood, both inside and outside. Thermoguard Thermoproof Clear Sealer also protects wood from the effects of weather, damp and sun damage. If you’re looking for protection from corrosion on stainless steel industrial surfaces, Jotun Jotatemp 650 is ideal. Jotatemp 650 works specifically on surfaces that need to withstand extreme high and low temperatures, between -185°C and 540°C and can be applied directly onto a surface that is at 400°C. ATSM E-84/UL 723- usually just called the “E-84”, this is the most common fire standard. This test measures the flame spread along a sample to determine the predicted burning behaviors. When working on new projects or renovations, keep in mind that almost all facilities require an ASTM E-84 test.

Party tested “Single Coat Coverage” up to 24 Mils WFT, on ceilings and walls, reducing labor costs equaling higher profits Passed CAL 1350 - qualify DC 315 as a low-emitting material in the Collaborative for High Performance Schools rating system (CHPS Designed & CHPS Verified) Unprotected steelwork can reach temperatures of 550°C in a fire, where it then can lose its load bearing capacity and collapse. Building regulations and legislation demand fire protection to upgrade the fire resistance of buildings.

Fire protection paints are the most common form of fire protection to steel, this is because of how widely available and cheap the products are. At International Passive Fire we have a whole department set up to deal with Specifications and Estimations for Intumescent Steel Paint. Our technical specification and estimating department consists of over 50 years of experience in the structural passive fire protection field and is completely independent of all manufacturers. Also, all of our work is free of charge (FOA). Fire retardant coatings: used as undercoats for regular paint or topcoats for intumescent coating. These coatings release a flame damping gas when the temperature rises to extremes. This forms a buffer zone, protecting the surface from the flames. This is the most common type of fireproof paint used as an independent coating for wood. In Summary, Intumescent steel paint thermally insulates structural steel in a fire, stopping premature collapse of the building. One of the more popular ways to apply heat proof paint is via spray devices. Jotun's range can be applied with spray guns, also available at Rawlins Paints. Jotun Solvalitt Alu is heat prooffor temperatures up to 600°C and acts as a heat resistant primer, mid-coat or finish-coat on steel. Although lots of our products can be used as heat resistant spray paint, there are also plenty of brushed heat resistant coatings, which can also be applied with a traditional roller if preferred. Very High Heat Resistant Metal Paint Thermoguard Flame Retardant Topcoat is available in over 4,000 colours from RAL, BS and NCS in a Gloss or Eggshell finish, please see above and choose from the available selection.

Intumescent paints and coatings are generally used in architecture and in the building of structural steel or timber members. They can provide a decorative and aesthetically pleasing finish on previously exposed steel, as well as keeping the material below its critical temperature to maintain its integrity in the outbreak of a fire or heat explosion. Intumescent coatings can be thinner than technically sprayed fireproofing methods. Unprotected Steel Cementitious coatings began surfacing in the mid-1900s when durable fireproofing solutions were needed. Concrete enhances the fire strength of a steel building, thus making cementitious paints an option. Over time, as dense concrete became too bulky, lighter cement paint methods were created. This type of coating is best in areas with low moisture exposure, as high moisture can cause an excess of corrosion and can reduce the effectiveness. Two of the biggest benefits of this coating are its affordability, especially for larger projects as well as its lightweight format. Coverage rate averages between 73-115 sq ft per gallon, depending on foam manufacturer. Call us for exact numbers.For large aluminium surfaces, such as offshore structures, petrochemical and chemical plants and power stations, International Intertherm 891 is an excellent choice. Intertherm 891 is a general-purpose heat resistant paint that gives a silver finish as it’s coloured with aluminium flake. It can be used as an industrial maintenance coating on steelwork with a temperature ranging from ambient to 315°C. With over 50 years of experience in the passive fire protection industry, International Passive Fire Ltd provides independent estimating services for intumescent coatings, epoxy intumescent and boarding systems for structural steel. P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.P211 Do not spray on an open flame or other ignition source.P251 Do not pierce or burn, even after use.P260 Do not breathe dust/fume/gas/mist/vapours/ spray.P264 Wash … thoroughly after handling.P271 Use only outdoors or in a well-ventilated area.P280 Wear protective gloves/protective clothing/eye protection/face protection.P312 Call a POISON CENTRE/doctor/…/if you feel unwell.P410 + P412 Protect from sunlight. Do no expose to temperatures exceeding 50 o C/ 122 o F.P501 Dispose of contents/container to …P102 Keep out of reach of children. To ensure fair pricing, we split colours into ‘Price Bands’ to group together similar priced colours. If you wish to search for the cheapest tinted colours, always select Price Band 1.

As well as protecting from the danger of fire, intumescent paints can be used to give a beautiful finish on steelwork. There are different finishes available, depending on the required look. A high quality waterborne intumescent paintwill give you a 30 or 60-minute level of fire resistance using just a few coats. A compatible anti-corrosion primer should be used prior to applying the intumescent paint. The table below can help you determine which type of fireproofing is right for your project. Cementitious Coatings It is good practice to key the surface while wet using waterproof abrasive paper or pads if the surface is new or you are applying a water-based finish on top of solvent-based or glossy paint, or on a very hard and impermeable surface. Thermoguard issue a Certificate of Supplyon request for each specified project for insurance, Fire and Building Control Authority and Client Records.All of our products that we sell are fire tested to British and or European standards, Intumescent paint for steel use the following standards: