SUS304 Stainless Steel Pull-Out Faucet Black Pull-Out Kitchen Faucet

Product Information

Archived copy". Archived from the original on 2016-08-13 . Retrieved 2016-06-20. {{ cite web}}: CS1 maint: archived copy as title ( link) SS304 has great weldability, heat and corrosion resistance, low-temperature strength, processability, mechanical properties, no hardening from heat treatment, and great warm workability like bending and stamping. SS304 is used in a vast array of applications in many industries, including food, medical and decoration work.

SS304 ( AISI 304) is the most frequently used stainless steel when making other stainless steel materials and is typically bought in a cold or annealed condition. Similar to SUS304, SS304 also contains 18% Cr and 8% Ni and is, therefore, referred to as 18/8.

SUS304の物理的性質

Stainless steel grade 1.4301/304 also corresponds to: S30400, 304S15, 304S16, 304S31 and EN58E. Corrosion Resistance SUS303とSUS304はそれぞれ異なる物理的な特性を持っています。使用する場面や要求される性能に応じて、適切な材料を選ぶことが重要です。 4. SUS304の特徴や用途について詳しく知りたい 4-1. SUS304の主な特徴と優れた性能 The reason why SS 304 material does not rust is because the Cr and Fe in it are oxidized to form a dense passive film to prevent further corrosion. Material SUS304 is not magnetic, but it may be slightly magnetic due to cold working. Corrosion resistance Architects also use stainless steel 304 for accents to exterior designs like fire and water features, railings, trim and panelling.

has good machinability. Machining can be enhanced by using the following rules: Cutting edges must be kept sharp. Dull edges cause excess work hardening. Cuts should be light but deep enough to prevent work hardening by riding on the surface of the material. Chip breakers should be employed to assist in ensuring swarf remains clear of the work. Low thermal conductivity of austenitic alloys results in heat concentrating at the cutting edges. This means coolants and lubricants are necessary and must be used in large quantities. Heat Treatment SUS304は強度があり、耐熱性も優れています。これにより、高温の環境や機械的な負荷のかかる場所でも安定した性能を発揮します。そのため、建築や自動車、航空機などの産業でも重要な役割を果たしています。Filler metal for welding of AISI 304 material: E308, E309. When the service temperature is 370 °C (700 °F), E308L can be used. Typical Applications and 18/10 stainless steel (also written 18-8 and 18-10) in the commercial tableware and fastener industries. For more severe corrosion conditions, when 304 stainless steel is too sensitive to pitting or crevice corrosion by chlorides or general corrosion in acidic applications, it is commonly replaced by 316 stainless steel. Chromium – Increases tensile strength, hardness, hardenability, toughness resistance to wear and abrasion, resistance to corrosion and scaling at elevated temperatures.

In many austenitic stainless steels, the difference between the steels comes from what alloy components have been added or removed. Therefore, SUS304 is referred to as the mother of many other SUS materials. Grade specification comparison Grade Offer, Dave (May 26, 1968). "Lofty Gateway Arch Dedicated And Hailed by HHH in St. Louis" (PDF). The Hartford Courant. p.12A. Archived from the original on September 14, 2011 . Retrieved January 6, 2011.Both materials are extremely close to one another in physical and chemical properties, so it can easily be said that they are the same materials as per these properties. Type 304 stainless steel equivalent to European EN (Germany DIN, British BSI, French NF…), ISO, Japanese JIS and Chinese GB standard (For reference). AISI 304 Stainless Steel Equivalent Grade