Stick It! Cool Melt Glue Gun

Product Information

Working in a well ventilated area is also very important. Under normal operating conditions both hot and cool melt glue should not be dangerous, but if overheated then toxic vapours can be released.

Additionally, if the surfaces you are gluing are polished or very shiny, gluing them together as-is may not be that effective as the glue will have very little to bond to. Always work in a well lit area free from any obstructions and clutter so that you can see what you are doing and won’t be constantly tripping over or working around objects that are in the way. It's safer. Since the temperature is lower you are not as likely accidents that result in serious burns Most glue guns heat up at the tip so you’ll know it’s up to temperature and ready when you squeeze the trigger and the glue starts to flow. How to Use a Glue Gun – A Step by Step Guide Wipe off any dust or debris produced by the sanding and you should now be ready to go. Step 4 – Start Gluing

WATCH VIDEO

At Bostik, we have two types of hot glue gun, Bostik Handy Hot Melt Glue Gun and Bostik DIY Hot Melt Glue Gun. Both provide strong adhesion to most materials like paper, wood, metal, glass, card, as well as many craft materials, so you can repair or create almost anything. Are there any other options than a low temperature glue gun when it comes to heat sensitive materials?

If you’re not going to be using it again or certainly for 30 minutes or so turn it off at the mains. It seems obvious, we know, but it’s a common question people are asking via Internet search engines. And it’s a question we are asked by customers when they are looking for a glue gun from our range. Any and all surfaces being glued should be free from any grease, dust or other debris and also dry. For surfaces of this type they will need to be roughed up first to provide a key for the glue to bond to. Use some 120 – 160 grit sandpaper and gently rub over the gluing area.As mentioned above, to turn on your glue gun this is normally just a matter of plugging it into the mains and leaving it to get up to temperature. Pieces of timber successfully joined together and left until glue has fully cured Step 6 – Finishing up A stand can come in handy, as can on/off switches and dual temperature control. Put some real thought into what you’ll require for the project or projects you have in mind. How We Selected With the first surface coated, move on to the next, using the techniques above to apply the glue to the surface.

The lower temperature glue guns are more suitable for more delicate items such cloth/material, paper, card etc. These guns tend to be used more by hobbyists and those involved with arts and crafts. Essentially, standard glue guns come in two different formats; high temperature hot melt and low temperature cool melt. With your work area now prepared and ready, the next job is to turn on your glue gun and get it up to temperature so it’s ready to use.Apply adhesive to one surface. Press surfaces together within 15 seconds. Use of clamp or other holding device is not necessary Before you can start using your glue gun you will first need to get it up to temperature so that when you pull the trigger the glue flows freely through the nozzle.

With the nozzle hovering over your drip mat, gently squeeze the trigger until glue starts to flow. The flow should be smooth and consistent, if not, there may be an issue with your gun. These guns are often referred to as High Temp and Low Temp glue guns. They have fixed settings 195°C for high temp guns and 130°C for low temp. In some cases (for example the Tec 820-12 and Tec 820-15), these glue guns have adjustable temperatures, from low to high melt. During use: Use the gun in a well-ventilated area to avoid inhaling glue vapours. Make sure it has a stable stand to rest upright when not in use, and don't rest it on its side. When the gun is switched on, focus on the glueing task and do not look away unless it's rested securely. If you need to leave it unattended, switch it off at the wall.Never use a glue gun tilted upwards or overhead. Whilst waiting for your glue gun to get up to temperature, now is a good time to do any prep work needed to the items you’re gluing. Any tool handled carelessly or incorrectly can cause painful and sometimes permanent injury, and a glue gun is no exception. With that in mind, please take a minute to read this safety advice for the next time you or a loved one uses your new glue gun.If needed, you can also clamp the items together. This will prevent any movement and also ensure the surfaces are fully engaged with each other. After use, on some occasions, excess glue can collect on and around the nozzle. In most cases when you next use it, the heating up process will melt this glue so it shouldn’t cause an issue, but if large amounts are present, wear some sturdy protective gloves and use a damp cloth to wipe the excess away.