MoPei Electric Mop Attachment for Dyson V7 V8 V10 V11 V15 Cordless Vacuums, Including a Detachable Water Tank

Product Information

I hoped for better for this attachment. There are barely any instructions so I’m not sure if I’m using it correctly. It looks like you stand on the red button & it sprays water, however, mine just drips a bit. There is nothing to say what the small thing in the picture is. You have to go over the floor multiple times as it leaves a line between the two pads. I’ve attached mine to the V10 & it fits no problem & also does actually vacuum at the same time.

Considering the V15s Detect Submarine is Dyson’s first vacuum mop, I think the company has done quite well. The appliance’s vacuuming skills are, as before, quite good. It’s the same vacuuming performance we saw from the V15 Detect, just quieter. So carpets are well taken care of, as are hard floors. The dynamic suction we’ve seen in the last few Dyson models is here, so most users will only need to leave the machine in Auto mode and it will do its thing and, as before, I still think the Digital Motorbar is the catch-all tool for any kind of floor. However, if it’s mostly fine dust in your home and you don’t have pets, then the Fluffy Optic that ships with the Complete model is good and no longer the novelty that I thought it was when I tested the V15 Detect. As a result of the oversaturation of the wet roller head, and the long drying time, after mopping my floors for the first time using the Submarine, there were visible streaks left behind on the floors. The floors were fairly clean prior to that first run — I had mopped with a traditional spin mop four days before testing the Submarine for the first time (I had company coming over, and also I was testing a different floor care product for work!), so it wasn’t an issue with my floors being overly dirty, which may have required a second pass with the Submarine. While the multipurpose cleaning head is an all new creation, the body of the Dyson Hard is a familiar beast, identical in appearance (and power) with the Dyson DC44, just in a new, white colour scheme. Maintaining the Submarine is easy as the velvet roller comes off and is fully washable, and you can rinse out the entire cleaning head – press a marked red button and the two parts slide apart.The official advice comes after Australian comedian and creator Christian Hull went viral with a TikTok video showing footage of him washing his floors using the attachment. He went on to explain he’d seen other videos raving about the unofficial attachment, explaining it works by removing the vacuum’s regular brush head and replacing it with a mop you add water to. And with this latest 2022 model, you get the added control for water release, with manual foot control. People who love Dyson products and who are ready to upgrade their existing vacuum will be the ideal buyers for this particular machine, as will people looking for a next-level vacuum-mop combo. The V15s Detect Submarine was better than any wet-dry floor care tool I’ve tried. During my testing, I managed to get 62 minutes in Eco mode, but I wasn’t quite enthused by the clean I got in this mode. On the other hand, Boost is great for carpets but you can expect to run out of juice in about 8 minutes.

I’ve used the Dyson V15s Detect Submarine two to three times a week for four weeks as my main vacuum, while also running the Dyson V15 Detect to compare suction during vacuuming. I allowed hair and dust to accumulate on the carpet in one room before the first test run.The process of removing the wet roller, dumping the dirty water and wiping dirt and debris from the extraction plate was incredibly simple and, more importantly, not gross at all. OK, it was maybe a little gross, but compared to the process for emptying the wash water and cleaning the dirty, wet roller on other comparable floor care tools, this is one area where Dyson truly got it right. This is where someone at Dyson didn’t think things through as the compartment isn’t well sealed. That means that after you finish mopping and you want to remove the head to clean it, you will be dripping water on the floor as it sloshes around due to the movement. The only way that I found to avoid this is to make sure the drip tray – a grey plastic tray that fits under the Submarine head – is placed by the sink you’re going to be cleaning the head at before you start to mop. The moment you finish, place the drip tray under the head and then detach it. It’s not foolproof though and you might just need the head again to mop up the spill you just created.

The Dyson Submarine wet roller head is compatible with Dyson’s new V15s Detect Submarine cordless vacuums; it is not compatible with other Dyson cordless vacuums, including the existing V15. I’ve actively been testing and reviewing vacuum cleaners of all kinds for the last six years and have learnt what to look for when choosing a machine that’s best for different kinds of homes. I also place high importance on value for money in any appliance I test. This attachment can be used for dry or wet mopping. For damp mopping, fill in the included water reservoir, attach the two ultra microfiber pads to the bottom of the tool, and you are ready to mop! The water will be automatically released as the brushes spin & scrub your floors. You can control how much water is released to get the desired finish. The floors are almost completely dry and sparkling clean after the clean! Dyson advises that you follow the manufacturer’s dilution ratio instructions to determine how much water to cleaner to use.Another thing to keep in mind is that the Submarine attachment doesn’t hold a lot of clean water. You’ll be able to do a large living room only before you’ll need to refill the little bottle in the cleaning head. So if your multi-room home is all hard floors, you’ll need to fill it often and empty the dirty water just as often, which may not be ideal for everyone. The LED display is the same as we’ve seen on the V15 Detect, with the graphical representation of the dust and dirt the same vertical graph (as opposed to the horizontal one on the Gen5detect). When the Submarine tool is attached, it displays the percentage of clean water available. A button below the display will let you change the power mode. Note: This mop must not absorb water directly. You can spray clean water on the floor, or the mop head to clean it, or moisten the mop first and wring out the water before mopping the floor. Unlike both the Gen5detect and the V15 Detect, I find the V15s Detect Submarine a lot easier to move around, no matter which cleaning head I’m using. According to Dyson’s spec sheet, the Complete model weighs 3.8kg, compared to the V15 Detect at 3.1kg and the Gen5detect at 3.5kg. I think that’s a mistake as it feels lighter than the V15 Detect in the hand, and the Submarine roller just makes it super easy to drag along a floor. I’ve tried measuring the machine myself on a weighing scale, but because I have to hold it in place, the measurements aren’t accurate and come in at just under 3kg, which can’t be right either.