Heatmiser neoHub Gen 2 - HomeKit-Enabled (Black)

Product Information

The neoHub connects to your home broadband router and wirelessly to the neoStats in your home. No special computer knowledge is required, simply plug into your router, create a FREE account via the Neo app and then take control of your heating, hot water and appliances from anywhere. Push notifications are short messages that are sent directly to your phone based on a condition in your neoApp, such as high or low temperature, door open or low battery warning.

The neoHub Gen 2 connects to your home router by an ethernet cable, so one free port is required. The neoHub Gen 2 is very much plug and play and pairing neoStat’s, neoAir & neoPlug to the neoHub Gen 2 couldn’t be easier. After you have paired all of your Neo devices (up to 32 are supported) you will have In Home and Remote access of your heating, hot water and appliances. Cloud Server Connection: The neoHub Gen 2 effortlessly connects to the Heatmiser Cloud Servers, eliminating the need for complex technical setup. Siri Voice Control: With HomeKit, you can ask Siri to set your Neo in each room to the desired temperature. Mesh Networking: With the neoHub Gen 2 managing network traffic, data is routed from neoStat to neoStat using the most efficient path. This mesh networking capability ensures excellent coverage throughout your home. The neoPlug can be used to boost the signal in areas with weak signals. No, there is no on-going fee. Neo is free to use and will be updated free of charge as enhancements are made to the service.Easily linked to all our Heatmiser V2 room thermostats with the associated app. Very pleased with the simplified control of our home heating give the current cost of fuels. High/Low temperature Alert:When the temperature in your home reaches your high or low temperature limit you will receive a push notification on your device. This will inform you of the location and device that triggered the alert.

Easy to install, using profiles and recipes are much easier than programming at the thermostat and you can achieve more. The Heatmiser neo Hubgateway G2 is the second generation gateway to the Neo System, providing remote control for all neoStats in your home, offering you a smarter way to control your heating from anywhere. Heatmiser neoHub is proud to be one of the very first heating control manufacturers to support HomeKit, the home automation platform from Apple. Smart Profiles – Allow you to program time and temperature settings and then apply them to a number of zones. Any subsequent change to the profile will be automatically applied to those zones using the profile.Heatmiser neoHub G2 is the gateway to the Neo System, providing remote control of all neoStat's and neoPlug's from your iOS or Android device. Yes, you can control your heating from the thermostat keypad, but you will not be able to access your heating system remotely. I haven’t fitted the hub as yet but I have been informed that this product will improve the system dramatically. The Heatmiser neoHub is the gateway to the Neo System, providing remote control all of the neoStats in your home.