Rust-Oleum AE0060004E8 400ml Radiator Enamel Spray Paint - Chrome

Product Information

Next, you will need to sand the chrome. Start by using heavy grit sandpaper, such as 120-grit. At this point in the process, you can either use side-to-side sandpaper action or circular motion. You may want to use finer sandpaper (e.g. 240-grit) after you are done with the heavier 120-grit. Wiping the surface with a clean cloth will help you to determine if there is any remaining chrome. If you can still see it (i.e. parts of the surface are still shiny), then keep sanding with the 240-grit sandpaper. Once you are happy with the outcome produced by this grain of sandpaper, start using a 320-grit in a circular motion. This is a finer variety that will ensure that the surface is completely smooth. In addition – Surface preparation: For best results, ensure surface is clean, dry & free from loose paint, mould & mildew, wax or oil. If wax has been used, clean the surface thoroughly with white spirit. We recommend that bare wood should be sanded before painting. Hard glossy surfaces should be abraded before painting. Cover surrounding areas to protect from spray mist. If you're a regular Superdrug shopper, you can now earn more freebies and discounts under its Health & Beautycard loyalty scheme, as the retailer has launched new 'VIP Rewards' as part of it. If there are any holes on the item you are painting, or damaged areas on the surface now is a good time to fill them with a metal filler. Instructions on how to do this will vary from brand to brand, but we can tell you that you should at least clean and allow the surface to dry before applying it and smoothing it out. We are consistently asked by homeowners about what surfaces they can and can't paint. The reality is, with today's technology, there are very little surfaces around the home that you can't paint. The answer is yes, you can paint radiators, but not with any paint. You must use a paint that has the necessary adhesion on metal surfaces.

Another possible route you could take is to match the colour of your radiator to the wall. This is becoming increasingly popular at the moment as modern decor has no limits. Previously it was a no-go area if you wanted to paint radiators, coving& other parts of interior trim the same colour as the wall. Today however, it is an easy way to add an ultra-modern and stylish feel to your home. It can be used on a variety of surfaces including metal, plastic and wood making it ideal for use on any interior and in some cases exterior surfaces. At this point, you can think about how you are going to protect the sections of the chrome item that will not need painting if there are any. For smaller areas, you can use painter’s tape. A newspaper will do the job for larger areas. Also take some time to cover up the surface you are painting on, whether it is a table or the floor. This will prevent the paint from creating a mess on your work surface, which will ultimately save you time. Grey is a colour that is often labelled boring, but it is a hugely versatile shade that is perfect for creating a contemporary look in any room. Modern grey shades such as anthracite grey are hugely popular at the moment and for good reason! Whether you want a dark impactful grey or a light grey that still maintains a subtly, there are an endless amount of options. Soft Sheen - a mid-sheen finish with a softer finish than silk, for use on interior walls & ceilings.If rust persists, then you will need to prime the area with a metal primer using light sandpaper, remove the rust and repaint the radiator. The best way to approach the process of painting chrome is thorough and methodical. When preparing your surface, you do not want to be creating an uneven surface as this will compromise the integrity and durability of your project in the long run. It is best to do the job properly the first time so that you are not disappointed and disheartened. Some products may be delivered straight to your door from one of our suppliers and these products will be labelled within the product description. The Halfords enamel spray paint is a universal, all-surface enamel paint that can be used on metal, plastic, ceramic and wood.

It’s incredibly easy to apply. All it takes is some vigorous shaking for a couple of minutes followed by steady spray patterns. Clean Up: Remove as much product as possible from application equipment before washing with water. Do not empty into drains or water courses. Some local authorities have special facilities for the disposal of waste paint. Make sure to remove any dust or grime from the radiator before you start, otherwise they will get mixed into the paint. Pay particular attention to the insides of grilles and any gaps behind the radiator where cobwebs may have accumulated. You might need to use a feather duster, vacuum cleaner attachment or can of compressed air to get into all the nooks and crannies.

Before the priming and painting begin, give your item a final wipe-down with a damp cloth to remove excess particles created by the sanding process and allow it to dry. You can apply this coating using a roller or paint brush. Depending on the paint you are using, you will have to use the correct paint brush. Synthetic paint brushes are made from materials that will not absorb water which makes them ideal for water-based paints, while natural bristles brushes are made from animal hair that will absorb water, meaning they can only be used with oil-based paints. If you are ensure what paint roller to use, why not read out full guide to the best paint rollers? When it comes to an oil-based paint, we highly recommend products from the Rust-Oleum Combicolor range. In particular, the Combicolor Metal Paint, which is an extremely high performance metal paint for a range of uses, including radiators. A primer and topcoat in one for added ease of use, Combicolor has a fantastic coverage of 10.5m² per litre and can be applied to radiator due to its fantastic adhesion to metal and its heat resistance to 90°C. All this, plus sag resistance which helps to eliminate brush strokes and leave a perfectly smooth finish on metal. But what happens if you choose the wrong product? In this case, you might end up with something that fails to inhibit corrosion, gives you an awful, uneven coverage or simply just doesn’t look that great.