Aico EI3024

Product Information

If it is a regular single beep (approximately once every minute), then the battery may be running low, and you may need to change the battery in the alarm. This is relevant for the 140RC Series alarms. The Aico Ei3014 is a heat alarm with a class A1 heat detection sensor which can be only be used as p.. This is the Aico Ei3024 is a multi-sensor fire alarm with enhanced optical smoke sensor and automati.. it’s so nice to deal with a company who are so accommodating, it’s been a refreshing change for us! This is the Aico Ei128R Surface Mounted Hard Wired Relay Module for Aico 3000 Series, Ei2110e, 160e ..

Ei3024 / 3016 / 3014 Alarms - Aico Mains Powered Ei3024 / 3016 / 3014 Alarms - Aico

Add on the Ei3000MRF SmartLINK Module for wireless interconnection and an enhanced home safety network. If the alarms are sounding, there may be a fire present. You should evacuate the property and be absolutely sure there is no fire before returning. If in doubt, always assume there is a real fire present and take the necessary action. Wonderful, knowledgeable customer service - a rarity these days and you even supplied me with a link to the product. The new, simpler A-G energy rating scale is stricter and designed so that very few products are initially expected to achieve the top “A” rating.Brilliant response, had immediate information. Told me next steps. Couldn't have been more helpful. Thank you Jane. The four-digit code shows you the year and week that the alarm was made. The first two digits relate to the year and the second two digits relate to the week. Thank you Jane! A fantastic member of staff, couldn't of been more helpful. An incredible asset to your company. Aico Colleagues tie their laces for the Oswestry 10k Charity run, hosted by Adrenaline Sporting Events. The Ei3024 is fitted with a large central Test/ Silence button to facilitate frequent testing of the alarm and system. The silence function allows the alarm/ system to be silenced in the case of a false/ nuisance alarm and low battery/ fault beeps. SmartLINK compatible - plug in an Ei3000MRF module for wireless interconnection, data extraction and real-time notifications of alarm activations and events via the SmartLINK Gateway and Portal.

Ei3024 Multi-Sensor Fire Alarm | Aico Ei3024 Multi-Sensor Fire Alarm | Aico

Most of our alarms have a 10-year life, after which they should be replaced to ensure you carry on getting the best protection. Never ignore a beeping alarm, as it is a warning sign of either a danger in the home or that an alarm needs maintenance.Insert a flat headed screwdriver into the removal slot of the alarm. This is marked with an arrow. Make sure you keep the screwdriver horizontal (i.e. parallel to the ceiling). The Ei3024 is powered by 230V AC mains. In the event of mains failure, the rechargeable 10 year built in tamper-proof lithium cells will provide up to 3 months power supply in the case of a wireless RF installation or up to 6 months in any other case. This is the Aico Ei3000MRF SmartLINK Module which allows for wireless interconnection and data extra..

Ei3024 Mains Interlinked Multi-Sensor Fire Alarm - Screwfix Aico Ei3024 Mains Interlinked Multi-Sensor Fire Alarm - Screwfix

On behalf of myself, and our Service staff, thankyou for your continued support, and thankyou for going the extra mile last week; our Client is now extremely satisfied! If you are using an Alarm Controller Ei450 this will continue for as long as you hold down the ‘Test’ button.

The Ei3024 can operate as a standalone Alarm or can be interconnected either by hard-wire or wirelessly (using the EI3000MRF module) enabling it to communicate with compatible Ei Alarms and accessories. Up to 20 devices can be interconnected. If you have more than one alarm in the property and they are interconnected, this will also trigger all the other alarms in the property. This alarm is a multi-sensor fire alarm - it contains both optical and heat sensors to provide a total fire coverage. The intelligent software it has installed allows it to detect all fire types (TF1 to TF6 & TF8) surpassing traditional single sensor Alarms. In addition, the chamber design, integrated insect screen and unique dust compensation algorithm reduce the risk of false alarms. The Ei Electronics Ei3016 is an Optical Smoke Alarm with a proven optical sensor and automatic dust .. This is the Aico Ei3024 is a multi-sensor fire alarm with enhanced optical smoke sensor and automatic dust compensation; it delivers a faster response to a wider range of fires. This multi-sensor alarm detects both smoke and heat from a fire, and so the location is ideally in the hallway, landing, living room, and bedroom areas.

Ei3024 Mains Multi-Sensor Heat and Smoke + Lithium Back Up Ei3024 Mains Multi-Sensor Heat and Smoke + Lithium Back Up

Multi-sensor fire alarm provides total fire coverage. Its combination of a heat and an optical sensor means that it can detect all fire types. Aico Ei450 RadioLINK Alarm Controller for up to 12 Heat/Smoke/CO Alarms, with Test, Locate, Silence Thankyou so much for your assistance, I don't know how you managed to source this equipment, but I'm very glad you did. All fitted and working now!!

We’re Here To Help

If the alarm contains AudioLINK – Once the alarm has stopped activating and it is safe to enter the property extract a report to identify the details of the incident. The memory feature allows an Alarm that has previously activated to be easily identified (through the red flashing LED).