Enet 2 m Ethernet to OBD interface cable, E-SYS ICOM Coding all F-Series

Product Information

The Ethernet to OBD cable or ENET is a cable commonly used as an adapter for coding a number of BMW models – such as the BMW F-series, the new 1 Series, 3 Series, 5 Series, 7 Series, GT, X3 and the latest BMW G-Series. The ENET cable is best used for coding on a Windows computer, however, you can also use it on an Android and iOS smartphone. Ethernet on unshielded twisted-pair cables (UTP) began with StarLAN at 1Mbit/s in the mid-1980s. In 1987 SynOptics introduced the first twisted-pair Ethernet at 10Mbit/s in a star-wired cabling topology with a central hub, later called LattisNet. [15] [34] :29 [41] These evolved into 10BASE-T, which was designed for point-to-point links only, and all termination was built into the device. This changed repeaters from a specialist device used at the center of large networks to a device that every twisted pair-based network with more than two machines had to use. The tree structure that resulted from this made Ethernet networks easier to maintain by preventing most faults with one peer or its associated cable from affecting other devices on the network. [ citation needed] IEEE 802.3 14. Twisted-pair medium attachment unit (MAU) and baseband medium, type 10BASE-T including type 10BASE-Te Ethernet Media Standards and Distances". kb.wisc.edu. Archived from the original on June 19, 2010 . Retrieved October 10, 2017. Please note that the “username” that appears in the above two paths will be the MacOS user’s username. Also, considering the fact that the Windows filesystem does not support case-sensitivity, the folder name cases specified above do not have any significance other than readability.

A non-uniform frame size configuration in the network using jumbo frames may be detected as jabber by end nodes. [ citation needed] Ethernet Tutorial – Part I: Networking Basics, Lantronix, December 9, 2014, archived from the original on February 13, 2016 , retrieved January 1, 2016 If you have an F-Series or G-Series BMW model and you want to do some BMW coding, you will need to use an ENET cable for it. The ENET cable will serve as an adapter for your OBD2 port that will connect your car and your computer via a dedicated software. The most common BMW software paired with the ENET cable is E-sys. In this post, we’re going to discuss how to set up the ENET cable with the E-sys software for BMW coding. System and Hardware RequirementsAfter you have successfully installed the software and tools that you need for BMW coding, you need to prepare these things prior to the actual coding process: Ethernet Technologies". Internetworking Technology Handbook. Cisco Systems. Archived from the original on December 28, 2018 . Retrieved April 11, 2011. Charles E. Spurgeon (2000). "Chapter 1. The Evolution of Ethernet". Ethernet: The Definitive Guide. ISBN 1565926609. Archived from the original on December 5, 2018 . Retrieved December 4, 2018.

Psdzdata is available in two versions – the Full and the Lite version. If you only want to do coding, Psdzdata Lite is recommended because it will save you some space – approximately around 1GB compared to 20GB of the Full version. http://www.eobdtool.co.uk/wholesale/bmw-enet-ethernet-to-obd-interface-cable-e-sys-icom-coding-f-series.html

Technical Support

Ralph Santitoro (2003). "Metro Ethernet Services – A Technical Overview" (PDF). mef.net. Archived from the original (PDF) on December 22, 2018 . Retrieved January 9, 2016. This however doesn’t apply to K+DCAN cables for E series coding because they are completely different. Ethernet is widely used in homes and industry, and interworks well with wireless Wi-Fi technologies. The Internet Protocol is commonly carried over Ethernet and so it is considered one of the key technologies that make up the Internet. Please configure the VMWare Network Adapter to have a bridged connection to the OSX physical adapter, as in the following screenshot: