Joined in 2023 
82 
63 About this deal
If you add a rotary base with a QR clamp, you should be able to do anything for typical landscape. It has to be level.to pan. The minimum height is a measure of how close to the ground the tripod can get. In all three cases this will be with the plate in place, as even the levelling head will force the tripod higher. Height is from the ground to the plate; in real world activity, you need to add the height of the tripod head. The maximum height is without a centre column (only available on the Innorel RT90C which, for completeness, raises the height to 200cm). Weight I have recently been searching for a new tripod and just wanted to post my experience having chosen the Innorel RT85C. I wrote to Innorel and they sent a video but it’s still not clear how now would use it without the center column.
Carbon Fiber Tripod INNOREL RT90C Bowl Tripods Professional Carbon Fiber Tripod INNOREL RT90C Bowl Tripods Professional
The head has a 50 lb load capacity, a max height of 4.6″, dual 90° notches for Portrait Mode (if you’re using the tripod for photography, or shooting from high to low). There are separate tension control knobs and the panning base has engraved degree marks. This may be a benefit when shooting and someone is calling angles or wind. I have clips and twists and the finger screws on my old Manfrotto 3001 tripods. I DEFINITELY prefer the clips, at least the Manfrotto clips.The response from Innorel was fast, professional and they took the time to break down some of the pros of the RT85C vs another model they sell themselves which was more expensive. I liked that honesty. i have it too, the only problem i've had is too tighten the guimbal head on the tripod, i've found the head tend to get loose... tried to fix it, but it seems impossible. Folded, the length is a compact 59 cm (23″) with a weight of 2.9 kg (6.3 lb). With full extension, the RT90C reaches 160 cm (63″). The tripod can go low as well, the minimum height is 55 cm (22″). Just remember that normally you have some kind of ball head or other attachment systems on top of this.
Innorel RT85C Carbon Fiber Tripod - Digital Photography Review Innorel RT85C Carbon Fiber Tripod - Digital Photography Review
The Innorel RT90C has a flat plate top, which is consistent with top range tripods from other manufacturers. This configuration provides excellent stability and the flat plate can be swapped out with the supplied bowl and levelling base (included) or the centre column (optional extra). Innorel RT90C Legs If I would recommend improvements they would be to replace the hanging hook from the centre column. It's a generic version and whilst it'll do the job, it's the only bit that looks a bit cheap. I'd also like to see Innorel develop a tall tripod without the centre column, similar to the Gitzo top end tripods. They do have one already but it's not as tall. This is a tall tripod. I'm 190cm and without a ball head, it extends to my height, with the centre column raised. I prefer not to use a centre column for stability so with it down, and with a ball head and camera attached, it's almost at my eye level - no more stooping down for me (for fully extended tripod photos at least). That said, with the centre column extended, stability is extremely good. I wouldn't use it like this in high winds but it's very solid. Table comparing tripods of similar type using manufacturers information (* prices available online at time of writing) Cost and Major Differences
Follow Me...
It seems like it would make a very compact, light weight but incredibly sturdy travel tripod for a pretty incredible price. I have several Manfrotto tripods including a nice set of 055 3 segment carbon fiber legs. The Innorel seems like it would be lighter, more compact, higher weight rating and considerably sturdier with no center column.
Tripod Review: Innorel RT90C - Does It Satisfy The Tripod
Heavier and more expensive, oh well, but I think the Innorel 90 maybe might be the better choice (mainly thinking about the 40mm diameter of the top leg segments and the bigger bowl diameter). Many PRS (Precision Rifle Series) shooters recommended the Innorel RT80C, but since its limit is 20 kg, I went for the bigger brother RT90C with a 40 kg capacity. This way the limit would be on my side, and I wouldn’t have to worry if I loaded it with a really heavy rifle with gadgets. As a rough guide I would say avoid things like filters, filter holders and lenses on there. Definitely consider LED lights (Godox), Flashes (Yonguo) and things like the cheap collapsible photography studios. Question I have the 90c tripod and been sitting for months since I bought it. Is the top plate supposed to rotate in place after fastening it? Mine is moving and irritating to attach and detach the gimbal head. About the weight rating, hmm, I don't know if 20 kg actually means 20 kg. But even if these 20 kg are closer to 10 or 12 kg, I think it still would be enough for most camera/lens combos plus a ballhead/videohead.I'm interested in your opinion regarding the 80c. Did you get the leveling base? I might get it for my gimbal and birding shoots. I'll wait for 11/11 to get it supposedly the most cheap.
INNOREL LT324C Carbon Fiber Tripod 146cm Professional Heavy INNOREL LT324C Carbon Fiber Tripod 146cm Professional Heavy
The feet attached to the Innorel RT90C on delivery are rubber, and 2.5cm spikes are included. The feet are attached by a ⅜” screw and there are many tripod feet of that fitting on the market. Mounting a Head JP Rifles PCS-12 in 6.5 Creedmoor in Magpul Dark Earth with B&T Suppressor and cover from Cole-Tac. Sight is a Schmidt & Bender 3-27×56 PMII with an Aimpoint ACRO C1 in a Spuhr mount. Magazine from Oberland. The only significant disadvantage is that I also use a geared head. This works fine with the centre column fitted. On the plate and bowl fittings movement can restricted when the geared head meets the tripod. This is a feature of tripods with this size base rather than a specific Innorel RT90C issue. Yes, that one would also be my choice, as mentioned in my first reply: " Heavier and more expensive, oh well, but I think the Innorel 90 maybe might be the better choice (mainly thinking about the 40mm diameter of the top leg segments and the bigger bowl diameter)." and Dovetail adapters to the bottom of all my heads for easily switching heads. This makes Attaching and detaching heads easy.I haven’t tried the model you’re considering, so I can’t comment on it. The RT90-C may be larger and heavier than you’d like, but it is well worth the money. The rubber feet are screw on types and can be replaced with the included metal spikes. These fit well and work great so far. The bowl diameter of only 58 or 60mm looks a bit unusual; I think what you find much more often are bowl diameters of 75 and 100mm. What’s your favorite tripod setup? How do you like this one and do you have any suggestions on how to improve it? Let us know in the comments below.
Great Deal 
New Comment