Megory Sink Plug Replacement Universal pop up Sink Plugs,Stainless Steel Drain Universal Sink Plugs, pop up Sink Plugs for Kitchen and Bathroom,Bath,Basin(A)

Product Information

Simple Installation】No need tool, just take out the old one and insert the strainer core to complete installation. The plug avoids the problem of having to replace the entire drainpipe when it is difficult to buy the correct size drain plug. It saves you the hassle of replacing the drainpipe. Screw the pivot rod nut onto the threaded fitting on the side of the tailpiece so the ball is secured inside the tailpiece. Apply a thin layer of pipe joint compoundto the top side of the rubber washer that will fit against the sink. Lift the entire drain assembly clear of the sink. This may require some wiggling of the tailpiece to break the seal on the drain flange. From under the sink, insert the pivot rod into the opening in the side of the tailpiece. Usually, there is a plastic washer on each side of the plastic ball. You should be able to feel the tip of the pivot rod slide through the opening in the stopper linkage inside the drain assembly.

The Universal Sink Drain Stopper is everything that was stated on the advert. I was expecting it to be quite cheap looking. I actually needed a product that would fit into a pre-existing drain hole where the normal lever system had broken which released the plug. Your fitting just dropped into the existing drain hole and fits perfectly. The look is also very satisfying too. These are amazing! No plumbing necessary. I needed to replace my existing oil rubbed bronze drains with pull assemblies because they were old and the finish had worn off. I didn't really want to go into replacing the ring things (more "terminology" later!) and getting into more plumbing than I was comfortable with. These fit right out of the boxes. Just unscrewed the existing plunger thing and plopped these on top of the existing drain things, and whalah they are fixed.Unlike ordinary button drain plugs, the upgraded pop-up sink drain plug has an anti-clogging basket inside that collects hairs and prevents the drain from clogging and your ring will never enter the sewer again. Sink stoppers can be lowered to stop water and allow the sink to fill. And when they're raised, they allow water to drain and flow through the sink's plumping.

Universal 2-in-1 Bathroom Sink Stopper - Chrome Pop Up Sink Drain Stopper, Push Button Sink Drain Stopper Replacement, Wash Basin Drain Filter Plug with Anti-Clogging Strainer, (Large Cover Cap) While holding the drain piece in place, fit the drain ring into the opening from above the sink, and thread the ring onto the drain tailpiece as far as you can by hand. Universal】This drain filter is designed for the universal bathroom sink drain. Considered the unsure of measurement, the drain stopper comes with 3 sizes of rubber rings. The ring screwed into the stopper is for the 1 1/4 " drain hole; If it doesn't work after installation, please try another size ring!Connect the vertical strap to the horizontal pivot rod by threading the spring clip onto the rod; one end of the clip attaches to each side of the strap. Push the pop-up drain tailpiece assembly up through the drain opening from under the sink as high as possible. Este producto es magnifico, evita que se vayan al drenaje, anillos u otros objetos, porque tiene una trampa que los sujeta.