Joined in 2023 
82 
63 About this deal
The firmware can be flashed with ./cc-tool -e -w CC2531ZNP-Pro-Secure_Standard.hex -v r. Change the path to the firmware accordingly. # Flashing on Windows Some Ember EZSP NCP coordinators can be flashed to upgrade the firmware using walthowd/husbzb-firmware ( https://github.com/walthowd/husbzb-firmware (opens new window)). It has been tested with the HUSZBZ-1 and Telegesis ETRX357USB and may work with other coordinators. You are responsible to ensure you load the correct firmware for your device - loading the wrong firmware may render your device inoperable. FYI, ITead just released a new “ZBDongle-E” adapter as an improved replacement for ITead’s previous barebone Silabs EFR32MG21 adapter and an alternative to ITead’s TI CC2652P based “Sonoff Zigbee 3.0 USB Dongle Plus” (as Silicon Lab and Texas Instruments adapters offer different compatibility). If your new radio does not appear or you need to reboot after plugging in new hardware, you can resume the migration after a reboot: under Network Settings, select Re-configure the current radio and choose your new radio. Full path to a directory containing custom quirk modules that will take precedence over any built-in quirks matching a device. OTA firmware updates
Sonoff Zigbee Gateway, ZBDongle-E USB Zigbee 3.0 USB Dongle
The Z-Wave and Zigbee mPCIe adapter supports Z-Wave and Zigbee / Thread / Bluetooth Low Energy (on your choice, selected by firmware update). Based on Silabs EFR32MG21P and ZGM130S.
Too Long; Didn't Read
To utilize these events, no new Item is required, instead a Rule can be used to directly trigger off of this event.
Getting started with Sonoff ZIGBEE 3.0 USB DONGLE PLUS
Start a warning using both strobe signal and siren (type 'burglar alarm'), with a duration of 30 seconds. When reporting issues, please provide the following information in addition to information requested by issue template: rule "Philips Hue ButtonI" when Channel 'zigbee:philips_rwl021:AAAAAAAA:BBBBBBBBBBBBBBBB:buttonI' triggered SHORT_PRESSEDAlso note that solutions integrating the binding can add implementations of type WarningTypeCommandDescriptionProvider to provide warning/squawk types together with command descriptions for all channels of type warning_device. # Channels triggered event & rules Not all hardware manufacturers always fully comply with the standard specifications. Sometimes, they may also implement unique features. For this reason, some Zigbee devices pair/join fine with ZHA but then only show none or only a few entities in the integration. Developers can work around most such interoperability issues by adding conversion/translation code in custom device handlers. For more information, refer to the section below on How to add support for new and unsupported devices. The binding table is used within ZigBee to configure devices to send reports to the binding when their state changes. The binding will attempt to set the required ZigBee bindings during device initialisation, but sometimes this can fail. Often this may occur on older devices that have limited memory, and only have a small number of entries in the binding table, and then manual manipulation of the table may be required. This will log data into the standard openhab.log file. There is an online log viewer (opens new window) available for viewing the logs.
Great Deal 
New Comment