Irwin HILGLM Hilmor Glm Pipe Bender including The Guides & Box Hilglm, 15mm-22mm

Product Information

However, as microbore is notoriously weak, it’s not like you need anything heavy duty. #2 – Monument Mini Pipe Benders The Monument Masters 1215K-XV, 1315-XVE, 1315Longarm-XVL , 1222G-XXII and 1322Extended-XXIIE create similar bend radiuses to a Monument 2600K combi bender; in fact the 1222G has a slightly tighter radius that the 2600K combi bender, as this radius is tighter it creates a slightly different profile on the outside of the bend when compared to a combi. throating occurs on testing with the XV, XVE (XVL) XXII, XXIIE as well as Monument 2600K and a Hilmor® GLM

We believe the 1215K-XV, the 1315XVE, the 1315Longarm-XVL, the 1222G-XXII and the 1322Extended-XXIIE are easier to use than a combi bender: Let’s be honest. There’s a tonne of rubbish on the market right now. Where there’s a top brand offering premium products, there’s a “copy” flogging absolute junk for half the price. And let’s face it, two separate guides just mean you have two more things to lose, and two more things you’ve got to find in your van every morning.Place the Lever Arm over the positioned pipe and place the Lever Hook onto the Pivot Pins, ensure the Nylon Guide is seated.

The price differential between Hilmor compared with Stanley and Rothenberger is just too small, and Hilmor offer so much more in terms of quality.

Problem? We’ve creased pipes (and had to junk that section) using cheap pipe benders multiple times.

We posed this question through the Tooltalk App (see all the answers in the app available for iOS or Android AOS). better sight lines– as the bend is in the same plane as the Arms of the bender it is easier to line up by eye We have also designed bending arm extension handles to increase the leverage for bending both 15mm 22mm copper pipe. These short threaded extension handles code 1224M fit both the 15mm XV XVE & XVL and 22mm XXII versions. One or more extension handles can be added for additional leverage.A. If your pipe is thin walled and your equipment is not clean (Answered by Colin Stainer Plumbing & Heating on 27 Jan 2021) Before you remove the pipe from the Former, view your bend angle; remove the pipe if it is correct, or if necessary, reapply the Lever Arm and increase the bend angle. Frequently Asked Questions FAQs XV is much smaller than a combi; arm length is 40cm compared to a combi arm length of 65cm. Note the 15mm XVL & 22mm XXII arm lengths are about 60cm They weigh under 500g, and that’s pretty-lightweight, but they certainly provide more than enough power to get the job done. Monument have reengineered a design previously unseen on the UK market. The (launched in June 2020 ) pipe benders, 1215K XV 15mm Pipe Bender, the 1315XVE 15mm (1315Longarm XVL 15mm) , the 1222G XXII 22mm and the 1322Extended XXIIE 22mm Pipe Benders deliver force to bend the pipe in the same plane as the bend. The traditional combi bender such as the Hilmor ® GLM or Irwin ® GLM or Monument ® MON2600 are offset from the bending plane.